Hi, how can we help?

1. Go Element> Device
2.A list of devices will be displayed, together with their Device Name(e.g., Khilgaon_BB_SW_143916),Network(e.g., Khilgaon),Zone(e.g., Khilgaon_Zone),Device Type(e.g., cisco),Type(e.g., L2-SWITCH),Total Interface Port,Used Interface Port,Status,Disk(%),Ram(%),CPU(%) and PacketLoss(%). If the status stays alert or down because it exceeds the threshold, the email will be escalated to the relevant group.This data can be exported in.csv format if needed.

Click +New to insert a device.

This will open the corresponding element, i.e., the device addition page with 5 sections:

(a) Under Basic info, put Zone(zone identifier),Network(network identifier),Group(group identifier), name(device's application name),Type(Type of element, e.g., Application), Version(if any), Installation Date, Device Type,IP, Total Port Count, Log Type, Log Label and Remarks.

(b) Under Command Configuration, put command template, login type, login delay, port, username, password, command execution template, multiple command delay.

(c) Under SNMP configuration, put SNMP Template, version, community string and port. Under Monitoring/ Scheduling, select Monitoring Template, separate monitoring thread, enable monitoring notification and enable monitoring time.

(d) Under Monitoring/ Scheduling, select Monitoring Template, separate monitoring thread, enable monitoring notification and enable monitoring time.

(e) Under Link configuration, click +New to add Link Name, Target device, link type, Monitoring method(e.g., command, snmp, api) and monitoring interval(in seconds).

Click Submit